Adult child suspension rehabilitation trainer training system bracket three-stage bed
SET suspension rehabilitation system
Technical parameters.
1,The suspension system is easy to install, low site requirements, size (L×W×H): 2930mm*2100mm*2400mm
2,Suspension points are reasonably distributed, each suspension has 4 suspension points, combined with 2 suspension points on the suspension frame, a total of 14
3,Each suspension device comes with 2 suspension ropes, 320cm long, supporting up and down stretching and self-fixing, a set of suspension ropes can bear 250KG; comes with a shift control rope
4,Standard with self-locking low resistance elastic black rope: natural state 300mm long, single rope 6, can bear a weight of 30KG.
5, standard with 0.3m and 0.45m self-locking combination elastic double rope, a total of 8.
6,Standard self-locking non-stretch rope: 300mm long, 4 and 600mm, 2 ropes, can bear a weight of 150KG
7, standard with 1 head and neck suspension belt, size 670 * 80 * 3mm, for the head and neck of the fixed and manipulation rehabilitation.
8, standard with 1 chest and back suspension belt, size 900 * 646 * 6mm, used to hold the chest or back, locking design tight confinement non-slip
9, standard with 4 wrist straps, size 330 * 155 * 3mm, used to support the wrist or ankle.
10,Standard with 4 narrow suspension straps, size 794*130*6mm, used for limb joint support fixed
11, standard with 1 wide suspension belt, size 770 * 240 * 6mm, for the upper limb torso support fixed
12,Standardly equipped with 2 round inflatable balance cushions, used for balance training
13, optional 1 three-stage electric massage bed, support height adjustment 500-940mm, upper and lower limb segments support electric adjustment angle, can bear 250KG
Audited Supplier 
){kind=link}
){kind=link}