Foldable Multi-position Massage Table Multifunctional Electric Physiotherapy Bed Lifting Massage Bed
| Product name |
Multifunctional electric physiotherapy lift bed |
| Product material |
High quality steel, high density sponge, medical leather |
| Bed height adjustment height |
50~94cm |
| Lay hands adjustable range |
0~9cm |
| Bed surface turning angle |
Front bed surface -20°~40°, middle bed surface 0°~25°, back bed surface 0°~75° |
| Rated load of bed surface |
135kg,The front bed is 13Kg, the middle is 78Kg, the back bed is 34Kg, lying hand 11Kg |
| Bed surface size |
195*60cm, front bed 52*32cm, middle bed 51*60cm, back bed 90*29.5cm, lying arm 52*12cm |
| Function |
Adjust the height of the bed as needed to massage all parts of the body, and the therapist can better give the patient passive training |
Matters needing attention
1. Over-temperature protection of the current-limiting controller: When the "linear drive system" is operated continuously and frequently, the "current-limiting controller" will start the over-temperature protection device due to the high temperature. At this time, the green color of the "current-limiting controller" When the indicator light goes out, the linear drive system stops working. After the temperature drops and the green indicator light of the "current limiting controller" lights up, you can continue to use it.
2 Before using the trainer, the rehabilitation practitioner should read the product manual in detail, be familiar with the performance, requirements and operation methods of the product, and check the multi-position treatment bed with no-load operation. It is confirmed that the multi-position treatment bed is in good condition before use.
3 The training should follow the "step by step" original side, and gradually increase the training time.
4 The training should be carried out under the guidance of rehabilitation specialists and the help of nursing staff
5. The patient must get on and off the bed when the bed is in a horizontal position (the angle indicator indicates 0 degrees). It is strictly forbidden for the patient to get on and off the bed when the bed is in a non-horizontal position, so as to avoid accidents or damage to the straight line of the electric upright bed. Drive System.
6 When the multi-position treatment bed is transferred, it is not advisable to have patients lying on the bed to avoid accidents. 7 In order to ensure the stability of the bed surface when rotating, use the fixed feet to touch the ground, and use the adjustment device to make the four fixed feet touch the ground at the same time 8 It is not advisable to continuously and frequently adjust the angle of the bed surface
Audited Supplier 
){kind=link}